fbpx

Bambu Lab A1

Sale!
Bambu Lab A1vasilismezos25/11/202401/12/2024

Bambu Lab A1

Original price was: €469.00.Current price is: €419.00.

Bambu Lab A1:
Product Features
Full-auto Calibration.
4-Color Printing with AMS lite(Not Included)
Under 48 dB Low Noise in Silent Mode.
Full-metal Linear Rails and Bearings.
Vibration and Flow Rate Compensation.

In stock (can be backordered)

Categories: , Tags: , ,

Description

Bambu Lab A1 3D Printer

Bambu Lab A1

Full-Auto Calibration

No Manual Adjustment

Active Flow Rate Compensation

Smooth At Every Corner

High-Speed Precision

10000 mm/s² Acceleration

Fully Calibration Flow rate compensation
Automated PA

Fully Automated PA (Pressure Advanced) Calibration

First of its kind, A1 runs the nozzle pressure-based flow dynamics calibration algorithm. There is no need to draw any pattern or get any manual pick & match involved, Bambu Lab A1 handles Pressure Advanced calibration automatically.

No More “Paper Method”

Bambu Lab A1 probes the bed with the nozzle to measure the absolute Z offset—no need to stick a paper as reference.

Bambu Lab A1 quick swift nozzle

Swift Maintenance

Quick Swap Nozzles

All-new quick swap hotend design, the hotend pops in and out with just 1 clip.

Active Motor Noise Cancelling

The Bambu Lab A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Active noise cancelation
Bambu Lab A1 14mins benchy

Bed Slinger, with CoreXY Speed And Quality(High-Speed Precision)

Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

图片加载失败文案

What’s in the box

Additional information

Weight 18 kg
Brand

Bambu Lab

Tech Specs

Category Specification
Body
Build Volume 256 x 256 x 256 mm³
Chassis Steel + Extruded Aluminum
ToolHead
Hot End All-Metal
Extruder Gears Hardened Steel
Nozzle Stainless Steel
Max Hot End Temperature 300 ℃
Nozzle Diameter (Included) 0.4 mm
Nozzle Diameter (Optional) 0.2 mm, 0.6 mm, 0.8 mm
Filament Cutter Yes
Filament Diameter 1.75 mm
Heatbed
Compatible Build Plate Bambu Textured PEI Plate, Bambu Cool Plate, Bambu High Temperature Plate, Bambu Dual-Texture PEI Plate
Max Build Plate Temperature 100 ℃
Speed
Max Speed of Toolhead 500 mm/s
Max Acceleration of Toolhead 10,000 mm/s²
Max Hot End Flow 28 mm³/s @ ABS (Model: 150*150 mm single wall; Material: Bambu ABS; Temperature: 280 ℃)
Cooling
Part Cooling Fan Closed Loop Control
Hot End Fan Closed Loop Control
Supported Filament
PLA, PETG, TPU, PVA Ideal
ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended
Sensors
Monitoring Camera Low Rate Camera (up to 1080P), Timelapse Supported
Filament Run Out Sensor Yes
Filament Odometry Yes
Power Loss Recover Yes
Filament Tangle Sensor Yes
Physical Dimensions
Dimensions 465 x 410 x 430 mm³
Net Weight 8.3 kg
Electrical Requirements
Input Voltage 100-240 VAC, 50/60 Hz
Max Power 1300W @ 220V, 350W @ 110V
Electronics
Display 3.5 inches, 320 x 240 IPS Touch Screen
Connectivity Wi-Fi, Bambu-Bus
Storage Micro SD Card
Control Interface Touch Screen, APP, PC Application
Motion Controller Dual-Core Cortex M4
Software
Slicer Bambu Studio (supports third-party slicers such as SuperSlicer, PrusaSlicer, and Cura; some features may not be supported)
Slicer Supported OS MacOS, Windows
Wi-Fi
Frequency Range 2412 MHz – 2472 MHz (CE), 2412 MHz – 2462 MHz (FCC), 2400 MHz – 2483.5 MHz (SRRC)
Transmitter Power (EIRP) ≤ 21.5 dBm (FCC), ≤ 20 dBm (CE/SRRC)
Protocol IEEE 802.11 b/g/n
is being added to the cart...