Description
Feels Like Real Wood
PLA Wood Black Walnut – Bambu Lab
PLA Wood Black Walnut offers a smooth yet slightly grainy texture, with the feel of real wood. Because of its natural wood-like colour and subtle scent, your models embody the essence of genuine wood.
So for projects that demand a true-to-life wood aesthetic, this filament blends beauty and authenticity for a natural finish.
Feels Like Real Wood
Since real wood powder is blended into the filament, prints pick up a genuine texture and colour, not just a printed effect.
Matte Finish, Fine Texture
Because the matte surface conceals layer lines effectively, prints come out smoother and more refined.
Works with a Standard 0.4mm Nozzle
Unlike some wood-textured filaments that need a wider nozzle, this only restricts 0.2mm — no equipment swap needed.
RFID for AMS
Printing parameters are embedded in RFID, so compatible AMS units read them automatically.
Beauty and Authenticity
Enhance Your PLA Models with Wood Accents
PLA Wood Black Walnut integrates seamlessly with other Bambu PLA filaments like PLA Basic and PLA Matte, so you can combine natural wood textures with vibrant colours in the same print.
Because of that, you can mix and match textures within a single design, opening up creative possibilities that a single-material print simply can’t offer.
Intelligent Filament Recognition
RFID Support for Automatic AMS Settings
RFID embeds all the printing parameters for PLA Wood Black Walnut, so the AMS reads them automatically as soon as you load the spool.
- Compatible with AMS
- Compatible with AMS lite
- Automatic material recognition
Best Uses for PLA Wood Black Walnut
Since it looks and feels genuinely wood-like, it suits projects where an authentic, natural finish matters more than a plastic look.
Accessory Compatibility
| Accessory | Recommended | Not Recommended |
|---|---|---|
| AMS System | AMS and AMS lite | — |
| Hotend / Nozzle | Standard nozzle sizes (0.4mm and above) | Stainless Steel Nozzle 0.2mm |
Drying, Colour, and Scent Notes
Higher Moisture Absorption
Since PLA Wood contains natural wood powder, it’s more sensitive to moisture than standard PLA. Dry it before use for the best print quality and a consistent finish.
Storage and Drying
We dry and vacuum-seal this filament before shipping. However, transport conditions can still affect moisture levels along the way, so we strongly recommend drying it right after opening and storing it in a sealed container with desiccant or in the AMS. Repeat drying and moisture-proofing before each long-term storage period.
Colour Variation
Because natural wood powder varies batch to batch, slight colour variation can occur depending on drying level and raw material differences — that’s a normal part of working with a genuinely natural material, not a defect.
Wood-Like Smell
During printing, PLA Wood emits a mild, natural wood scent due to the wood powder content. It’s non-irritating and non-toxic, so there’s nothing to worry about while printing indoors.
For more detail, view the
official Bambu Lab filament-drying guide
.
PLA Wood Black Walnut Technical Specifications
| Specification | Details |
|---|---|
| Material | PLA Wood (natural wood powder infused) |
| Colour | Black Walnut |
| Net Weight | 1 kg |
| Diameter | 1.75 mm ±0.03 mm |
| Surface Finish | Matte, fine texture |
| Spool | Basic Reusable Spool included |
| AMS Compatibility | AMS and AMS lite |
| Nozzle Compatibility | 0.4mm and above — not compatible with 0.2mm |
Downloads
What’s in the Box?
- PLA Wood Black Walnut filament, 1 kg
- Basic Reusable Spool
- Desiccant packet
- Protective product packaging
Note that packaging and small included items can vary by production batch, and colour may also look different depending on lighting and screen settings.
PLA Wood Black Walnut in Cyprus
PLA Wood Black Walnut from Bambu Lab is available from The 3D Factory, Cyprus’s official Bambu Lab reseller. So wherever you are on the island — Nicosia, Limassol, Larnaca, Paphos or Famagusta — we can deliver it to you.
We also supply compatible Bambu Lab printers, AMS systems, and other wood-textured filaments including AzureFilm PLA Wood Bamboo and Filament PM PLA+ WoodJet Natural.
Related Products and Official Resources
PLA Wood Black Walnut FAQ
Do I need a special nozzle for this filament?
No — a standard 0.4mm nozzle works fine. The only restriction is a 0.2mm nozzle, which isn’t compatible.
Does it really smell like wood?
Yes, it gives off a mild, natural wood scent while printing, thanks to the wood powder content. It’s non-irritating and non-toxic.
Will every spool look exactly the same colour?
Not necessarily. Since it contains natural wood powder, slight colour variation between spools is normal and depends on drying level and raw material differences.
Do I need to dry it before printing?
Yes. Since it’s more moisture-sensitive than standard PLA, drying it before use and after opening keeps print quality consistent.
Can I combine it with other PLA filaments in one print?
Yes. It integrates well with other Bambu PLA filaments like PLA Basic and PLA Matte, so you can mix wood texture with vibrant colours in the same design.
Is it compatible with the AMS?
Yes, it’s compatible with both AMS and AMS lite, with RFID handling automatic material recognition.
Is PLA Wood Black Walnut available in Cyprus?
Yes, The 3D Factory stocks it, since we’re Cyprus’s official Bambu Lab reseller and deliver across the island.
