Description
The Best PLA Gradient Filament in Cyprus — Pink Citrus
If you are looking for a PLA gradient filament in Cyprus that delivers stunning colour, professional quality and effortless printing, the Bambu Lab PLA Basic Gradient – Pink Citrus is the answer. With a seamless soft transition from warm coral to bold red, this filament transforms even the simplest models into vibrant, head-turning pieces — straight off the build plate, no post-processing required. Available now with fast island-wide delivery from The 3D Factory, your official Bambu Lab reseller in Cyprus.
Why This Gradient PLA Filament Stands Out
Soft Bicolour Gradient
The smooth transition between warm coral and bold red creates a vivid, energetic gradient that evolves across every 8–10 metres of filament. The PLA Basic formula delivers a smooth, vibrant finish straight off the build plate — ideal for display pieces, personalised gifts and bold home décor.
High-Speed Printing — Up to 300mm/s
Designed for modern high-speed printers including the Bambu Lab X1C, X2D, P1S, P2S, A1, A1 Mini, H2C and H2D. Pink Citrus Gradient maintains a refined, detailed finish even at maximum speeds — no visible layer lines, no stringing, no sacrifice in quality.
RFID Smart Auto-Configuration
Every spool carries an embedded RFID chip. When loaded into any Bambu Lab AMS or AMS Lite, the printer automatically reads and applies the correct settings — nozzle temperature, speed, retraction and flow rate. Load the spool and print immediately. No manual configuration, no guesswork. For full details on filament drying and storage, refer to the official Bambu Lab filament drying guide.
Superior Layer Adhesion — 261% Stronger
Do not let the beautiful finish mislead you. This PLA gradient filament delivers 23.8 kJ/m² Z-layer impact strength — a 261% improvement over standard matte PLA (6.6 kJ/m²). Your prints will look exceptional and hold up under real-world use.
| Material | Z-Layer Impact Strength | vs Matte PLA |
|---|---|---|
| Normal Matte PLA | 6.6 kJ/m² | Baseline |
| Bambu PLA Basic Gradient | 23.8 kJ/m² | +261% |
How the Gradient Effect Works
The colour transition is engineered into the filament during manufacturing and repeats approximately every 8–10 metres. Here is what to expect based on model size:
- Small prints (under 20g) — one dominant colour or a very subtle warm shift
- Medium prints (50–150g) — a clear coral-to-red gradient fully visible
- Large prints (200g+) — multiple colour cycles create a dramatic, layered effect
For the most striking results, choose tall or voluminous models — vases, busts, lamp shades, sculptures. The more filament consumed, the more dramatic the gradient becomes. The warm coral-to-red palette is especially striking on geometric and sculptural designs.
Who Is This Filament For?
- Hobbyists and makers — beautiful results with zero extra effort
- Gift makers — unique gradient prints make memorable personalised gifts
- Cosplay and prop makers — natural colour transitions for wearable and display pieces
- Teachers and students — visually engaging prints perfect for STEM education
- Artists and decorators — sculptural home décor with a premium finish straight off the printer
Printing Guide & Tips
- PLA Basic Gradient is a new colour option of the PLA Basic series. Please use the default PLA Basic setting for printing. To obtain higher printing quality, set a lower printing speed (reduce layer speed and acceleration).
- Drying PLA Basic Gradient is optional. Recommended drying condition is 55 °C for 8 hours in a blast drying oven, or 75 °C for 12 hours on your printer heatbed. For more details refer to the Bambu Lab filament drying guide on the Bambu Lab Wiki.
- Gradient Length: 8–10 metres per colour cycle.
Recommended Printing Settings
| Nozzle Temperature | 190 – 230 °C |
| Bed Temperature | 35 – 45 °C (with glue) |
| Max Print Speed | 300 mm/s (0.4mm nozzle) |
| Slicer Profile | Use default Bambu Lab PLA Basic settings |
| Compatible Build Plates | Cool Plate SuperTack · Smooth PEI · Textured PEI |
| Drying (optional) | 55 °C for 8h (blast oven) · or 75 °C for 12h (heatbed) |
| Storage | Sealed with desiccant · below 20% RH |
Full Technical Specifications
| Diameter | 1.75mm ± 0.03mm |
| Spool Weight | 1kg |
| Density | 1.24 g/cm³ |
| Tensile Strength | 36 ± 2 MPa |
| Bending Strength | 73 ± 3 MPa |
| Bending Modulus | 2270 ± 60 MPa |
| Impact Strength | 61.2 ± 2.8 kJ/m² |
| Z-Layer Impact Strength | 23.8 kJ/m² (+261% vs matte PLA) |
| Vicat Softening Temp | 57 °C |
| Melting Temperature | 160 °C |
| Gradient Length | 8–10 metres per colour cycle |
| RFID | Yes — AMS & AMS Lite compatible |
| Spool | Basic Reusable Spool + Desiccant |
| Part Number | A00-M3-1.75-1000-SPL |
What’s in the Box
- 1 × Bambu Lab PLA Gradient – Pink Citrus filament (1kg)
- 1 × Basic Reusable Spool
- 1 × Desiccant sachet
- RFID tag embedded in spool
Also Available In
The Bambu Lab PLA gradient filament range is also available in Blueberry Bubblegum (sky blue to violet) and Cotton Candy Cloud (soft pink to baby blue) — all in stock with fast delivery across Cyprus.
Buy with Confidence in Cyprus
The 3D Factory is Cyprus’s official Bambu Lab reseller — based in Nicosia and delivering island-wide to Limassol, Larnaca, Paphos, Famagusta and everywhere in between. Every filament is 100% genuine, stored in controlled conditions and dispatched with care. Our team has over 10 years of 3D printing expertise — here before, during and after your purchase.
- Fast delivery across Cyprus
- Official Bambu Lab products — genuine, never grey market
- Expert English and Greek-speaking support team
- 2-year warranty on all Bambu Lab products
Frequently Asked Questions
What is Bambu Lab PLA Gradient – Pink Citrus?
Bambu Lab PLA Gradient – Pink Citrus is a premium PLA Basic gradient filament featuring a smooth natural transition from warm coral to bold red every 8–10 metres. It is part of the PLA Basic series, beginner-friendly and compatible with all Bambu Lab FDM printers including AMS and AMS Lite.
Where can I buy Bambu Lab PLA Gradient – Pink Citrus in Cyprus?
You can buy Bambu Lab PLA Gradient – Pink Citrus in Cyprus directly from The 3D Factory at the3dfactory.com.cy. We are the official Bambu Lab reseller in Cyprus and offer fast island-wide delivery to Nicosia, Limassol, Larnaca, Paphos and Famagusta.
Is Bambu Lab PLA Gradient compatible with AMS?
Yes. Every spool includes an embedded RFID chip automatically read by Bambu Lab AMS and AMS Lite. The printer loads all correct settings instantly — no manual configuration required.
How noticeable is the gradient effect on Pink Citrus?
The coral-to-red gradient transitions approximately every 8–10 metres of filament. Small prints under 20g may show one dominant colour. Medium prints (50–150g) display a clear vivid gradient. Large prints over 200g show multiple dramatic colour cycles. Tall models like vases and busts give the most striking results.
What printers is this filament compatible with?
It works with all Bambu Lab FDM printers including the X1C, X1E, X2D, P1S, P2S, A1, A1 Mini, H2C and H2D. It also works with any standard FDM printer that accepts 1.75mm filament. RFID auto-configuration works exclusively with Bambu Lab AMS and AMS Lite.
What are the recommended print settings?
Use the default PLA Basic profile in Bambu Studio or Orca Slicer. Nozzle: 190–230 °C. Bed: 35–45 °C with glue. Max speed: 300mm/s with 0.4mm nozzle. Compatible plates: Cool Plate SuperTack, Smooth PEI and Textured PEI.
Does it need drying before printing?
Drying is optional. If exposed to humidity, dry at 55 °C for 8 hours in a blast oven or 75 °C for 12 hours on the heatbed. Store sealed with desiccant below 20% RH.
Is it stronger than regular PLA?
Yes. It delivers 23.8 kJ/m² Z-layer impact strength — 261% stronger than standard matte PLA at 6.6 kJ/m². Prints are significantly tougher and less prone to layer separation.
How long does delivery take across Cyprus?
The 3D Factory dispatches island-wide to Nicosia, Limassol, Larnaca, Paphos and Famagusta — typically same or next business day. Visit the3dfactory.com.cy for current timeframes.
What other gradient colours are available in Cyprus?
The 3D Factory stocks the full Bambu Lab PLA gradient filament range in Cyprus: Pink Citrus (coral to red), Blueberry Bubblegum (sky blue to violet) and Cotton Candy Cloud (soft pink to baby blue). All available at the3dfactory.com.cy.
